- In the Water module, click Meter Inventory.
- Then click Add (at the top-right of the table).
- On the new page, fill in the Serial Number, then click the magnifying glass next to Address.
- Search and select the desired address (this is the physical address of the meter).
- Click Save
- go to the Water Table View
- filter the Constituent column on the desired owner name
- select the record
- right-click
- Water Master View
- In the middle of the screen, look for the Meter ID number (you'll need this number in a minute)
- click the magnifying glass
- search on the new meter number
- select the new meter
- click Save (at the top-right of the screen)
- click the Usage tab
- click Add at the top-right of the table. This will open a new tab
- fill in the MeterId field with the Meter ID number from the billable
- fill in the Read Date, Previous Reading, Current Reading, and Current Usage (if there is one)
- click Save
- if the new meter type is different than the original, the Class will need to be changed:
- click the magnifying glass next to Class
- search the description of the meter type. Ex: "Wat Sew Res Sensus Omni C2 (1 1/2)) 1000"
- select the desired Class in the search results
- click Save on the billable again
Changing the Meter on a Current Customer Print
Modified on: Tue, 20 Jun, 2023 at 12:49 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.